Titan (Ti6Al4V) - brake pad pin nature

Manufacturer:
www.jaeger-schrauben.de

Material:
Ti-6AI-4V
rolled thread

Tensile strength:
930 - 1000 N/mm ²

Specified length is always measured complete with head, e.g. for M10x1x48 = 48mm

BST-1  M10x1x48 (e.g. for Nissin-caliper Honda/Kawasaki)
Bolt length 37mm, bolt diameter 5mm
with turnover of 4,5mm which is about 6mm wide

BST-2  M10x1x58 (e.g. for BMW-caliper)
Bolt length 74mm, bolt diameter 5,9mm
just below the head 8,6mm with a groove for a locking clip

BST-3  M10x1x62 (e.g. for Nissin-caliper Honda/Kawasaki)
Bolt legth 51mm, bolt diameter 4,6mm

BST-4  pin, length 55,5mm, diameter 5,95mm (e.g. for Yamaha-caliper)
with 2 holes of 1,5mm, 13mm from each end of the bolt

BST-5 M10x1x64
Bolt legth 53mm, bolt diameter 5,9mm

BST-6 pin, lenght 48mm, for Brembo-caliper P4 34/34
e.g. for Aprilia, Benelli, Bimota, Cagiva, Ducati, Husqvarna, KTM, Moto Guzzi, MV, Triumph

BST-7 pin, lenght 46mm, for Brembo-caliper P4 30/34 F / P4 30/34 CNC
e.g. for Aprilia, Benelli, Bimota, Cagiva, Ducati, Husqvarna, KTM, Moto Guzzi, MV, Triumph

BST-8  M10x1x52 (e.g. for Tokico-caliper Honda/Kawasaki/Suzuki)
Bolt legth 41mm, bolt diameter 4,6mm

BST-9  M10x1x70 (e.g. for Nissin-Zange, Honda Crosstourer)
Bolt legth 50mm, bolt diameter 5,9mm

BST-10  M10x1x81 (e.g. for Nissin-Zange, Honda Crosstourer)
Bolt legth 62mm, bolt diameter 5,9mm

BST-11  M10x1x53 (e.g. for Tokico-caliper Honda/Kawasaki)
Bolt length 42mm, bolt diameter 4,6mm
with turnover of 4,3mm which is about 6mm wide

BST-12  pin, lenght 55,5mm, diameter 5,95mm (e.g. for BMW 1200 GS)
mit 2 holes of 1,7mm

A-3 pin bolt caliper M10x1 (e.g. Nissin caliper / Yamaha)
high 6mm

Prices:
All listed prices per piece in Titan nature.
Titan we offer in the following color variations:
polished (15% surcharge)
polished and blue anodized (15% surcharge)
polished and gold anodized (15% surcharge)
polished and black DLC coated (15% surcharge + 3,50€)
polished and gold titanium nitride coated (TiN) (15% surcharge + 2,50€)

We polishing and anodizing the titanium products themselves, so that these are available from stock.
The DLC and TiN coating can be externally we perform, here is a delivery time of approximately 4-8 weeks is restarted.

Other dimensions on request