Manufacturer:
www.jaeger-schrauben.de
Allen head bolt
ISO 4762 / old DIN 912
Material:
Ti6AI4V (Titan Grade 5)
rolled thread
Tensile strength:
930 - 1000 N/mm ²
Spanner size:
M2 = SW1,5 (Spanner size)
M2,5 = SW2
M3 = SW2,5, M4 = SW3,
M5 = SW4, M6 = SW5
M8 = SW6, M10 = SW8
M12 = SW10
Head diameter:
M2 = 3,7mm
M2,5 = 4,5mm, M3 = 5,5mm
M4 = 7 mm, M5 = 8,5 mm
M6 = 10 mm, M8 = 13 mm
M10 = 16 mm, M12 = 18mm
heads hight:
M2 = 2mm
M2,5 = 2,5mm
M3 = 3 mm
M4 = 4 mm
M5 = 5 mm
M6 = 6 mm
M8 = 8 mm
M10 = 10 mm
M12 = 12mm
Prices:
All listed prices per piece in Titan nature.
Titan we offer in the following color variations:
polished (15% surcharge)
polished and blue anodized (15% surcharge)
polished and gold anodized (15% surcharge)
polished and black DLC coated (15% surcharge + 3,50€)
polished and gold titanium nitride coated (TiN) (15% surcharge + 2,50€)
We polishing and anodizing the titanium products themselves, so that these are available from stock.
The DLC and TiN coating can be externally we perform, here is a delivery time of approximately 4-8 weeks is restarted.
The screws can be shortened from a length of around 35mm and cost 1.79 euros extra per screw.
In the "size and price" selection, select "shorten screws" at the very bottom and tell us under "Remarks" when completing the order which screws should be shortened. The thread of the screws is so long that it is usually not a problem to shorten them to a different size, otherwise ask specifically.
No exchange!
Other dimensions on request
washers
similar to DIN 125 / DIN 9021
Titan nature
Allen head bolt, conical
similar to ISO 4762 / old DIN 912
Titan nature
lens head screw
similar DIN 7380
Titan nature
Allen head bolt, with a low head
DIN 7984 / similar to DIN 6912
Titan nature
nut with disk
similar to ISO 4161 / old DIN 6923
Titan nature